Pemasok Derek Overhead dan Derek Gantry di Indonesia

The post 23 Sets of Overhead Crane Shipped to Uzbekistan appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

Aicrane® Overhead Crane & Gantry Crane In Uzberkistan

AicraneLinda — Mon, 19 Jul 2021 03:19:32 +0000

23 Sets of Overhead Crane Shipped to Uzbekistan

Since December 2020, our client has ordered 23 sets of overhead crane from Aicrane,, including 21 sets of HD single ...

5 ton Overhead Crane for Steel Factory

NLH 5 ton overhead crane, it is equipped with electric hoist to lifting heavy objects in warehouse, our clients has ...

10 ton Overhead Crane in Uzberkistan

Our mission is providing most suitbale heavy duty lifting equipmemnt for our clients from all around the word, from light ...

LH 10T Double Girder Overhead Crane

Double girder overhead crane is designed to move, lift or transport heavy materials, which is are widely used for transferring ...

Multi-pivots Electric Single-Beam Suspension Overhead Crane

The multi-pivots electric single-girder suspension overhead crane is a special purpose travelling crane, it is specially designed and produced to ...

10ton Gantry Crane for Lifting Concrete Slab

Choosing a gantry crane must consider various aspects, the most important is the experience of the heavy crane supplier, supplier ...

30 ton Semi Gantry Crane in Uzberkistan

Semi gantry crane is a kind of gantry crane with one supporting legs, and the other side of the crane ...

[contact-form-7]

The post Aicrane® Overhead Crane & Gantry Crane In Uzberkistan appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

LD 10ton Overhead Crane in Argentina

AicraneLinda — Wed, 23 Jun 2021 09:29:18 +0000

10 ton LD single girder overhead travelling crane used in warehouse for handling iron and steel processing parts.

10 Ton Overhead Crane in Argentina

Our Argentina client already had a workshop before, it is mainly used for the production of the steel beam, pipe fabrication, When he went into production for a few months, he realized it is vital to buy a overhead crane for materials handling in the workshop. Due to the workshop of the iron and steel processing parts workshop has been completed, beside considering the max lifting capacity, we also need to customize overhead crane to go match with the design of the workshop dimension ( width, height, length, etc).

High Quality, Perfect Service

The LD 10 ton single girder overhead crane is produced within one month, now our overhead crane has finished the installation and is already in use, the quality and work efficiency of the Aicrane® LD 10 ton overhead crane help won the satisfaction of the client.

[contact-form-7]

More Related Products You May Need:

The post LD 10ton Overhead Crane in Argentina appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

Electromagnetic Overhead Crane for Steel Warehouse

AicraneLinda — Mon, 24 May 2021 10:58:52 +0000

Electromagnetic Overhead Crane

Why Need to Buy Electromagnetic Overhead Crane

Electromagetic overhead crane can help hand materials, scrap steel, pieces of iron and scrap iron, seperate the metal to the waste, especially also can help you load and transport elecromagetic black metal materials(as steel ingot, merchant steel, pig iron ). it is definitely a right decision to choose buy our electrigetic overhead crane for safety and improving work efficiency.

Component of the Electromagnetic Overhead Crane

It’s equipped with:
1. box shape bridge frame;
2. crane travelling mechanism;
3. trolley;
4. accessible electromagnetic plate;
5. electric equipment;
6. cabin operating
7. rain-proof equipment (when in outside)

[contact-form-7]

More Related Products You May Need:

The post Electromagnetic Overhead Crane for Steel Warehouse appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

Multi-pivots Electric Single-Beam Suspension Overhead Crane

AicraneLinda — Sat, 17 Apr 2021 03:02:55 +0000

The multi-pivots electric single-girder suspension overhead crane is a special purpose travelling crane, it is specially designed and produced to meed the needs of the large span industrial or warehouses, such as aircraft manufacturing plant and aircraft maintenance workshops, This kind of overhead crane can reduce the influence of crane weight on the floor structure of these factories, and it is beneficial to reduce the height of the building and save amount of plant construction cost.

Multi-pivots-Electric-Single-Beam-Suspension-Overhead-Crane

Specific Case Design

The following are our customized Multi-pivots electric single-girder suspension overhead crane according to the needs of customers.

Span 56.4m multi point suspension crane

12.5 ton multi point suspension crane

1. Lifting capacity: 12.5t
2. Span: 56.4M
The workshop is too wide, which is used for hangar maintenance, so the span is too large, If there are only two pivots, the cross section needs be designed much larger for bearing heavy loads.
[contact-form-7]

More Related Products You May Need:

The post Multi-pivots Electric Single-Beam Suspension Overhead Crane appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

12 Ton Hydraulic Mooring Winch shipped to Philippines

AicraneLinda — Fri, 26 Mar 2021 09:27:36 +0000

hydraulic mooring winch in philippines

Details:

1. Load capacity: 12 ton;
2. Driven type:hydraulic,
3. Drum type: double drum, waterfall type;
4. Application: used on boat for mooring
5. Rope capacity: 680 m;
6. Working speed: 10 m/min

Customization: Aicrane manufacturers wide range of mooring winch for ship, boat, vessel.pull capacity may vary from 1 tonnes to 200 tonnes.Hydraulic or electric driven can be chosen.Single or double drum or water fall types are available.welcome to Contact Us f you need any kinds of ship winch.

Drum & Gypsy Types Ship Winch

Drum Ship Winch

Load capacity: 1 ton- 100 ton
electric, hydraulic

Get A Free Quote

Gypsy Ship Winch Winch

Load capacity: 1 ton- 100 ton
electric, hydraulic

Get A Free Quote

Marine Capstan

Load capacity: 0.5 ton- 35 ton
electric, hydraulic

Get A Free Quote

[contact-form-7]

The post 12 Ton Hydraulic Mooring Winch shipped to Philippines appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

30 ton Semi Gantry Crane in Uzberkistan

AicraneLinda — Tue, 23 Feb 2021 08:51:29 +0000

Semi gantry crane is a kind of gantry crane with one supporting legs, and the other side of the crane need to run on the building track, compared with overhead crane, it will save some cost and sapce of the warehouse, here are two sets of 30 ton semi gantry crane working on the warehouse.

single girder semi gantry crane

Specific Parameters:

Products Details:	Capacity: 30 ton
	Span: 12m
	Lifting Height: 5m
	Work Duty: A4
Customer’s Initial Inquiry Content:	I am looking for semi gantry crane for factory to load/unload max 30 ton cargos, please help us and recommend suiable crane.

semi gantry crane from AICRANE®

Customization:

When asking for a quote, please give us the following information:
1, Load capacity? Span? lifting height? power voltage? cantilever length? With the parameters,we can give you precision offer for your need, if you have any doubt on it, please contact us directly online.

[contact-form-7]

More Related Products You May Need:

The post 30 ton Semi Gantry Crane in Uzberkistan appeared first on Pemasok Derek Overhead dan Derek Gantry di Indonesia.

Marble Handling Overhead Crane

AicraneLinda — Thu, 28 Jan 2021 06:45:09 +0000

With the continuous development of the economic, construction industry factory emerge in large number, Aicrane overhead crane are also increasing, The following is a real shot from the customer site. Our clients bought two sets 10 ton overhead crane for moving marble, lifting stones, and handling stones,etc. It is features of high efficiency, precision, safety, stable, save labor costs.

Single Girder Overhead Crane for Marble Industry

Single Girder Overhead Crane for Stone Handling

Specific Parameters:

Products Details:	Capacity: 10 ton
	Span: 5m ~ 20m
	Lift Height: 3m ~ 15m
	Work Duty: A4
Customer’s Initial Inquiry Content:	I am looking for overhead crane for marble factory to load/unload max 10 ton quarry/rocks, please make an offer for suitable equipment.

Customization:

[contact-form-7]

More Related Products You May Need: